Expert Services

EV Charger Installation
for Salt Lake Valley & Davis County Homes

A Level 2 charger installed correctly means faster charging, a safer circuit, and no surprise trip to the breaker box in the middle of the night. Our electricians handle the wiring, the permit, and the panel capacity check in one visit.
Get a Free Estimate

Level 2 Charging Done the Right Way

More homeowners along the Wasatch Front are adding an EV to the driveway, and a wall-mounted Level 2 charger is the difference between an overnight top-up and hours spent waiting on a standard outlet. But a Level 2 charger isn't a plug-and-play appliance — it needs its own dedicated circuit, sized correctly for the charger's amperage draw, and installed to current code.

Does Your Panel Have the Room?

This is the step most DIY installs skip, and it's the one that matters most. A dedicated 240V circuit for a Level 2 charger can draw anywhere from 30 to 50 amps continuously, and older panels — particularly the 100-amp panels still common in Wasatch Front homes built decades ago — often don't have the spare capacity once you account for HVAC, water heating, and everything else already on the panel. Before we run a single wire, we check your panel's existing load against its rated capacity. If there isn't room, we'll walk you through what a panel upgrade looks like rather than installing a charger that overloads your system.

Permits and Code Compliance

EV charger circuits require a permit and inspection in nearly every jurisdiction we serve. We pull the permit, install to code — proper wire gauge, breaker sizing, GFCI protection where required, and correct disconnect placement — and schedule the inspection so you're not left with unpermitted work sitting behind your wall.

Charger Hardware

We install Wallbox home charging units along with other major Level 2 charger brands, matched to your vehicle's charging capability and your garage or driveway layout. Whether you need the charger mounted on an exterior wall, in a garage, or run to a detached carport, we plan the conduit run before we start so there's no guesswork on install day.

Planning for What's Next

EV adoption continues to grow across Utah, and a lot of homeowners we work with are adding a charger now while also thinking ahead — a second vehicle, a home addition, or a backup generator for outages. If you're weighing several upgrades at once, it's often more cost-effective to handle panel capacity once rather than in stages. Check our current specials for active promotions, or request a free estimate and we'll evaluate your panel and garage setup together.

What Our Customers Say About EV Charger Installation

Real reviews from Salt Lake Valley homeowners

Braden was absolutely awesome! He went above and beyond when coming to help when our contractor walked out and left things unfinished and messy. Will only use him for any and all electrical needs from now on. He walked us through everything, was honest and fair and professional. 10/10 recommend. Thank you, thank you!
KH
Kylie H.
Farr West, UT
I've had a great experience with the Aireo Home Services team. They've been to my home recently for tankless water heater maintenance, a new electrical panel with smart breakers, and some HVAC updates. …
KL
Kristi L.
Bountiful, UT
Good work, careful of our schedule, fair pricing We used the plumber and the electrician. Nice people, careful to not overcharge.
LR
Linda R.
Fruit Heights, UT
5.0
Google Rating
212
Google Reviews
500+
Homes Served
24/7
Emergency Service

EV Charger Installation Questions, Answered

What kind of circuit does a Level 2 charger need?

A Level 2 charger needs its own dedicated 240V circuit, sized for the charger's amperage draw and installed to current code. That circuit can draw anywhere from 30 to 50 amps continuously.

Does my electrical panel have room for an EV charger?

Before we run any wire, we check your panel's existing load against its rated capacity. Older panels, particularly the 100-amp panels still common in Wasatch Front homes built decades ago, often don't have spare capacity once HVAC, water heating and everything else is accounted for.

What if my panel can't handle it?

We walk you through what a panel upgrade looks like rather than installing a charger that overloads your system.

Do I need a permit to install an EV charger?

EV charger circuits require a permit and inspection in nearly every jurisdiction we serve. We pull the permit, install to code, including proper wire gauge, breaker sizing, GFCI protection where required and correct disconnect placement, and schedule the inspection.

What chargers do you install?

We install Wallbox home charging units along with other major Level 2 charger brands, matched to your vehicle's charging capability and your garage or driveway layout. We plan the conduit run before install day, whether the charger goes on an exterior wall, in a garage or at a detached carport.

Should I plan for other electrical upgrades at the same time?

If you're also thinking about a second vehicle, a home addition or a backup generator, it is often more cost-effective to handle panel capacity once rather than in stages. Request a free estimate and we'll evaluate your panel and garage setup together.

Factory-Authorized Dealer

Factory-Authorized Dealer Brands.

We've earned the factory's stamp of approval. Becoming a Factory Authorized Dealer requires a rigorous commitment to quality, customer satisfaction, and ongoing technical certification.
Trane
Carrier
Lennox
Mitsubishi
Honeywell
Aprilaire
Rheem
Navien
Rinnai
Moen
US Boiler
Leviton
Eaton
Generac
Wallbox
Free Estimate

Get an EV Charger Installation Estimate

Tell us a bit about your project and we'll reach out to schedule an on-site consultation.
Your Details